 |
Search by Model Number |
 |
|
|
|
 |
Featured Products |
 |
|
|
OPHIR RF Model 5193
The 5193 is a 50 Watt broadband amplifier that covers the 2 – 6 GHz frequency range. This small and lightweight amplifier utilizes Class A/AB linear power devices that provide an excellent 3rd order intercept point, high gain, and a wide dynamic range.
Moreover, the 5193 exhibits excellent harmonic rejection as evidenced by harmonic signals typically better than 20 dBc below the fundamental.
Furthermore, the amplifier has both input and output RF protection. On the input side, RF overdrive circuitry protects the unit from levels of up to +13 dBm. On the output side, the amplifier has high load VSWR protection.
OPHIR RF Model 5193 is significantly smaller in size and key applications include immunity and automotive testing.
For further information, please contact us.
|
|
|
Model 7000 New Broadband RF Power Amplifier
The 7000 is a 100/50 Watt broadband system that covers the 1 – 2500 MHz frequency range. This small and lightweight system utilizes Class A/AB linear power devices that provide high gain, excellent efficiency and a wide dynamic range.
The 7000 comes with a RS232 controller and a front panel display in a Rear panel Connectors configuration.
For further information, please contact us.
|
enlarge image
|
|
Model 7001 New Broadband RF Power Amplifier
The 7001 is a 25W multi channel broadband system that covers the 20-3000 MHz frequency range with a single RF output port.
The system includes RF high power switches controlled by the system controller. The RS 232/Ethernet and/or Front panel key-pad provides full control and reduces the power consumption to the minimum by shutting down the unselected channel.
For further information, please contact us.
|
enlarge image
|
|
Model 7002 New Broadband RF Power Amplifier
The 7002 is a 50W multi channel broadband system that covers the 20-2500 MHz frequency range with a single RF input and single RF output port.
The system includes RF high power switches controlled by the system controller. The RS232/Ethernet and/or Front panel key-pad provides full control and reduces the power consumption to the minimum by shutting down the unselected channel.
For further information, please contact us.
|
enlarge here
|
|
Model 7003 New Broadband RF Power Amplifier
The 7003 is a multi channel broadband system that covers the 20-2500 MHz frequency range with a switching capabilities for transmitting into 4 antennas.
The integrated system provides 22W to 50W power as specified in the spec for any selected frequency range. The RS232/Ethernet and/or Front panel key-pad provides full control and reduces the power consumption to the minimum by shutting down the unselected channel.
For further information, please contact us.
|
enlarge here
|
|
Model 7004 New Broadband RF Power Amplifier
The 7004 is a 20W multi channel broadband system that covers the 20-2000 MHz frequency range with a single RF output port.
The system includes RF high power switches controlled by the system controller. The RS232/Ethernet and/or Front panel key-pad provides full control and reduces the power consumption to the minimum by shutting down the unselected channel.
For further information, please contact us.
|
enlarge here
|
|
Model 7005 New Broadband RF Power Amplifier
The 7005 is a three channel amplifier that covers the 80-6000 MHz frequency range.
Each channel can transmit independently and includes its AC, RF and IEEE-488 GPIB interface.
The 7005 is based on OphirRF standard legacy proven systems 5072FE-001, 5153FE with couplinh port, and 5193FE-001.
For further information, please contact us.
|
enlarge here
|
|
Model 7006 New Broadband RF Power Amplifier
The 7006 is a 50-80W multi channel broadband system that covers the 1.0-6.0 GHz frequency range with a single RF output port.
The system includes RF high power switches controlled by the system controller. The RS 232/Ethernet and/or Front panel key-pad provides full control and reduces the power consumption to the minimum by shutting down the unselected channel.
For further information, please contact us.
|
enlarge here
|
|
Model 7008 New Broadband RF Power Amplifier
The 7008 is a dual band solid state pulsed amplifier that covers a 1.15 to 1.45 GHz, and 2.7 to 3.1 GHz with peak output power of 1000W and 500W with a single RF input and single RF output port.
The amplifier is controlled by Ethernet and include external Gate BNC interface.
The output power can be varied by RS232 and forward power coupled port is provided.
For further information, please contact us.
|
enlarge here
|
|
Model 7009 New Broadband RF Power Amplifier
The 7009 is a multi channel broadband system that that covers the 10KHz – 3000 MHz frequency range with switching capabilities for transmitting into 4 Antennas. This integrated system provides 30W to 250W power as specified in the spec for any selected frequency range.
The system includes RF high power switches controlled by the system controller. The RS232/ Ethernet and/or Front panel key-pad provides full control of the Antenna interface and reduces the power consumption to the minimum by shutting down the unselected channels.
For further information, please contact us.
|
enlarge here
|
|
Model 7010 New Broadband RF Power Amplifier
The 7010 is a dual channel broadband system that that covers the 700MHz – 6000 MHz frequency range in a single Antenna port. The system includes RF high power switch controlled by the system controller. The RS232/Ethernet and/or Front panel key-pad provides full control of the HPA and reduces the power consumption to the minimum by shutting down the unselected channel.
For further information, please contact us.
|
enlarge here
|
|
Model 7011 New Broadband RF Power Amplifier
The 7011 is a dual channel broadband system that that covers the 20MHz – 1000 MHz frequency range in a single Antenna port. The system includes RF high power switch controlled by the system controller. The RS232/Ethernet and/or Front panel key-pad provides full control of the HPA and reduces the power consumption to the minimum by shutting down the unselected channel.
For further information, please contact us.
|
enlarge here
|
|
Model 6010 New Broadband RF Power Amplifier
The 6010 is a 125 Watt broadband amplifier that covers the 20 – 1000 MHz frequency range, designed for the NMR application. This small and lightweight amplifier utilizes Class A/AB linear power devices that provide an excellent 3rd order intercept point, high gain, and Blanking Speed of < 5uS (TTL) controlled via a BNC connector on the rear panel.
Furthermore, the amplifier has input RF protection. On the input side, RF overdrive circuitry protects the unit from levels of up to +13 dBm.
|
|
|
|
 |
|
